Mechanical Feature
Specifications
Accessories
Dimensions
Mechanical Feature
- The main casting part is made of meehanite casting.
- The spindle is one piece machined from SCM440 alloysteel, thermal refining, high-frequency and precision polishing.
- Milling head type:
-Variable (VS) Steps (SS) Inverter (VC)
8 Steps | ||
60HZ | 80-120-195-320-570-1040-1680-2700(RPM) | |
50HZ | 68-115-185-285-400-910-1500-2280(RPM) |
16 Steps | ||
50HZ | 2P | 136-230-370-570-1080-1820-3000-4560(RPM) |
4P | 68-115-185-285-400-910-1500-2280(RPM) |
-Inverter type used YASKAWA VFD.
- Maximum spindle speed up to 4560rpm/50HZ
- Used type B belt drive.
- Hardened and ground X,Y axes slideway.
- Turcite-B coated on X Y ways.
- Dovetail slideways.
Specifications
Model | Unit | SEM-15VS | SEM-15SS | SEM-15VC | |
Travel | |||||
Longitudinal travel (M./A.) | mm | 700/650 (Opt. 875/825) | |||
Cross travel (M./A.) | mm | 360 | |||
Vertical travel (M./A.) | mm | 400 | |||
Slideway X/Y/Z | type | △ / △ / △ | |||
Quill travel | mm | 127 | |||
Overarm travel | mm | 457 | |||
Overarm swivel | degree | 360 | |||
Quill swivel (R&L)/(F&B) | degree | ±45/±45 | |||
Dist. from spindle nose to table | mm | 50-450 | |||
Spindle centerline to column | mm | 60-517 | |||
Table | |||||
Dimension | mm | 1067×230 (Opt. 1244×230) | |||
T-slots (WidthxNo.xPitch) | mm | 16x3x63 | |||
Max. table load | kg | 200 | |||
Spindle | |||||
Milling head | type | Variable | 8/16 Steps | Inverter | |
Speed | 60Hz | rpm | 50-3500 | 80-2700(8) | 55-3600 |
50Hz | rpm | 68-2280(8) | |||
rpm | 68-4560(16) | ||||
Vertical feeds | mm/rev | 0.04/0.08/0.15 | |||
Taper | type | NT 30 or R8 (Opt. NT40) | |||
Quill Diameter | mm | 85 | |||
Motor | |||||
Main spindle | HP | 3 | 3 | 5 | |
Machine | |||||
Space(LxWxH) | mm | 1800x2200x2150 | |||
Packing dimension(LxWxH) | mm | 1480x1600x1810 | |||
Net Weight | kg | 900 | |||
Gross Weight | kg | 1000 |
Accessories
Standard accessories
- Draw bar
- Tool box and tools
- Chip cover on Y axis
- Manual lubrication system
Optional accessories
- Power drawbar
- Working lamp
- Auto lubrication system
- Power feed(X/Y/Z)
- Gear box(X/Y)
- Servo feed(X/Y)
- Z axis rapid up/down
- Electric box (simple/general /deluxe)
- Ball screw (X/Y)
- 4″/6″/8″(100/150/200mm)riser block
- Digital readout ( DRO)
- Coolant system(Pump 1/8HP)
- Chip tray
Dimensions