【SEM-860 series】 Vertical Turret Milling Machine
SEM-860 series
X/Y/Z travel : 860(Opt.1000)/426/470mm
Spindle taper : NT40(Ø105)
Spindle motor : 5HP
Hardened ground-X/Y/Z
Square way-Y/Z
Spindle taper : NT40(Ø105)
Spindle motor : 5HP
Hardened ground-X/Y/Z
Square way-Y/Z
Mechanical Feature
Specifications
Accessories
Dimensions
Mechanical Feature
Specifications
| Model | Unit | SEM-860S | SEM-860C | ||
| Travel | |||||
| Longitudinal travel (M./A.) | mm | 860 (Opt. 1000) | |||
| Cross travel (M./A.) | mm | 400 | |||
| Vertical travel (M./A.) | mm | 470 | |||
| Slideway X/Y/Z | type | △ / □ / □ | |||
| Quill travel | mm | 140 | |||
| Overarm travel | mm | 540 | |||
| Overarm swivel | degree | 360 | |||
| Quill swivel (R&L) / (F&B) | degree | ±45/Fixed(Opt.±45) | |||
| Dist. from spindle nose to table | mm | 20-490 | |||
| Spindle centerline to column | mm | 85-625 | |||
| Table | |||||
| Dimension | mm | 1270×300 (Opt. 1370×300) | |||
| T-slots (Width x No. x Pitch) | mm | 16x3x70 | |||
| Max. table load | kg | 300 | |||
| Spindle | |||||
| Milling head | type | 10/20 Steps | Inverter | ||
| Speed | 60Hz | rpm | 70-3350(10) | 55-3600 | |
| 50Hz | rpm | 58-2780(10) | |||
| rpm | 58-5560(20) | ||||
| Vertical feeds | mm/rev | 0.04/0.08/0.15 | |||
| Taper | type | NT40 | |||
| Quill Diameter | mm | 105 | |||
| Motor | |||||
| Main spindle | HP | 5 | |||
| X-axis traverse | HP | 1/2 | |||
| Z-axis elevation | HP | 1/2 | |||
| Feedrate | |||||
| X-axis speed | mm/min | 0-1500 | |||
| Z-axis speed | mm/min | 345 | |||
| Machine | |||||
| Space(L x W x H) | mm | 1920x2860x2420 | |||
| Packing dimension(L x W x H) | mm | 1620x2100x1960 | |||
| Net Weight | kg | 1700 | |||
| Gross Weight | kg | 1850 | |||
Accessories
Standard accessories
- Draw bar
- Tool box and tools
- Chip cover on Y axis
- Manual lubrication system
Optional accessories
- Power drawbar
- Working lamp
- Auto lubrication system
- Power feed(X/Y/Z)
- Gear box(X/Y)
- Servo feed(X/Y)
- Z axis rapid up/down
- Electric box (simple/general /deluxe)
- Ball screw (X/Y)
- 4″/6″/8″(100/150/200mm)riser block
- Digital readout ( DRO)
- Coolant system(Pump 1/8HP)
- Chip tray
Dimensions
